Drivetrain
Chassis
Body
Dealer Info
tel: (865) 988-8088Classic Cars & Muscle Cars For Sale in Knoxville TN
2520 S Carver Rd
Maryville TN, 37801
For Sale we have brought in this 1968 Chevy Chevelle. The resto started by pulling the Chevy down to the frame and did a chemical dip of the body. They then cut out all the bad metal and installed new panels. The drip rails were shaved for a slicker look. The body was the set back on the frame so they could installed the rest of the panels to ensure a good fit before paint. They wanted a more stealth look so they did all the chrome and stainless in black. For paint they covered the body in Matte Gray with a Black Stripe Down the side. They wanted to keep the stock look so they used the correct bucket seats and console. They did do an upgrade to the gauges with AutoMeter Sport Comp. Also, they added a Stainless Tiger cage along with 3” Racing Belt. The momo steering wheel is mounted to an Ididit Column which is tilt. This car is also set up with Vintage AC with the control in the dash. Under the hood it's powered by a 415 CI LS3. It was built to Nascar Specs and Tuned to 600 HP by Norris Motorsports in FL. The trans is a Tremec 6 Speed with a 12 Bolt Rear End by Moser with 355 gears and true trak unit. Also, this Chevelle has a custom Aluminum Radiator with Twin 16” Fans. The fuel pump is from Welbro and it has a Stainless fuel Tank from Ricks Hot Rods. Up front it has the First Air Ride Remote Resevoir Titanium Shockwave System offered for a Chevelle. It has Nitrogen filled shocks with Ride Height Sensors. They used a Detroit Speed 12.7 Ratio Gear Box and 13” Wilwood 6 Piston Caliper Brakes. Out back the brakes are also by Wilwood with 12” Rotors and 4 Piston Calipers. If we can help you in any way with questions or a specific picture, you can call our office at (865)988-8088. Or feel free to call Daniel at (423) 807 0600, Devvin at (865) 256 2366, or you can e-mail us at smokymountaintraders@yahoo.com.
- 136378A138112
- Odometer Reading: 8,406
- Up for sale we have a 1968 Chevy Chevelle LS Pro Touring. This Chevelle was built with intentions of the previous owner to have the Ultimate Chevelle. He sat down with Frank Serafine of Prodigy Customs in Orlando, FL and came up with this sweet ride. The resto started by pulling the Chevy down to the frame and did a chemical dip of the body. They then cut out all the bad metal and installed new panels. The drip rails were shaved for a slicker look. The body was then set back on the frame so they could install the rest of the panels to ensure a good fit before paint. They wanted a more stealth look so they did all the chrome and stainless in black. For paint they covered the body in Matte Gray that's accented by the Black Stripe Down the side.
- To finish off the look it's sitting on a set of Forgeline Wheels with BFG Tires.
- On the inside they wanted to keep the stock look so they used the correct bucket seats and console. They did do an upgrade to the gauges with AutoMeter Sport Comp. Also, they added a Stainless Tiger cage along with 3” Racing Belt. The momo steering wheel is mounted to an Ididit Column which is tilt. This car is also set up with Vintage AC with the controls in the dash.
- Under the hood it's powered by a 415 CI LS3. It was built to Nascar Specs and Tuned to 600 HP by Norris Motorsports in FL. The trans is a Tremec 6 Speed with a 12 Bolt Rear End by Moser with 355 gears and true trak unit. Also, this Chevelle has a custom Aluminum Radiator with Twin 16” Fans. The fuel pump is from Welbro and it has a Stainless fuel Tank from Ricks Hot Rods. Up front it has the First Air Ride Remote Resevoir Titanium Shockwave System offered for a Chevelle. It has Nitrogen filled shocks with Ride Height Sensors. They used a Detroit Speed 12.7 Ratio Gear Box and 13” Wilwood 6 Piston Caliper Brakes. Out back the brakes are also by Wilwood with 12” Rotors and 4 Piston Calipers.
- If we can help you in any way with questions or a specific picture, you can call our office at (865)9888088. Or feel free to call Daniel at (423) 807 0600, Devvin at (865) 256 2366, or you can email us at smokymountaintraders@yahoo.com.
For Sale we have brought in this 1968 Chevy Chevelle. The resto started by pulling the Chevy down to the frame and did a chemical dip of the body. They then cut out all the bad metal and installed new panels. The drip rails were shaved for a slicker look. The body was the set back on the frame so they could installed the rest of the panels to ensure a good fit before paint. They wanted a more stealth look so they did all the chrome and stainless in black. For paint they covered the body in Matte Gray with a Black Stripe Down the side. They wanted to keep the stock look so they used the correct bucket seats and console. They did do an upgrade to the gauges with AutoMeter Sport Comp. Also, they added a Stainless Tiger cage along with 3” Racing Belt. The momo steering wheel is mounted to an Ididit Column which is tilt. This car is also set up with Vintage AC with the control in the dash. Under the hood it's powered by a 415 CI LS3. It was built to Nascar Specs and Tuned to 600 HP by Norris Motorsports in FL. The trans is a Tremec 6 Speed with a 12 Bolt Rear End by Moser with 355 gears and true trak unit. Also, this Chevelle has a custom Aluminum Radiator with Twin 16” Fans. The fuel pump is from Welbro and it has a Stainless fuel Tank from Ricks Hot Rods. Up front it has the First Air Ride Remote Resevoir Titanium Shockwave System offered for a Chevelle. It has Nitrogen filled shocks with Ride Height Sensors. They used a Detroit Speed 12.7 Ratio Gear Box and 13” Wilwood 6 Piston Caliper Brakes. Out back the brakes are also by Wilwood with 12” Rotors and 4 Piston Calipers. If we can help you in any way with questions or a specific picture, you can call our office at (865)988-8088. Or feel free to call Daniel at (423) 807 0600, Devvin at (865) 256 2366, or you can e-mail us at smokymountaintraders@yahoo.com.